Forged steel gate valve

28 Mar 2018 23:45:00 source：aen-valve.com browse：4102

Specifications
Valve Size	1/4“–2”， DN10–DN50
Pressure Class	150LB–2500LB，PN16–PN420
Materials	Carbon Steel: A105, LF2，Stainless Steel: F304, F304L, F316, F316L,Duplex: F51, F55，Alloy: F1, F5, F5A, F9, F11, F22;
Design and Manufacturing Standards	API602，ASME 16.34，BS 5352，BS 6364;
Flange Dimension Standards	SW Socket welding ends according to ASME B16.11，BW butt end by ASME B16.25,NPT threaded connectors according to ASME B1.20.1
Pressure Test Standards	API 598
Quality/Product Certifications	ISO9001,ISO14001,ISO18001;
Fugitive Emissions	ISO 15848-1，API 622;
NACE	NACE MR 0103 NACE MR 0175;
Valve operator options	Handwhel， Worm Gear，Electric actuator， Pneumatic actuator，Hydraulic Actuator;
Shutoff Class	API 598 (Zero Leakage), API 6D
Bore	Full Bore，Reduced Bore
Process Connection Types	SW，NPT，BW ，RF，RTJ

Introduction
Technical Parameters

Designed for use in high temperature steam and water, this multipurpose gate valve can be used in a wide variety of general purpose applications including vents, drains and isolation of compressors, condensers, heaters, pumps, water lines, heat exchangers, bypass lines, flash tanks, control valves, etc.

·Two inch and smaller valves are available with threaded or socket weld ends as standard.

·Made from one piece, die-forged bodies.

·All internal surfaces are accurately machined to provide maximum performance.

·Renewable seat rings are made from hardened stainless steel, faced with Stellite.

·The wedge is forged, hardened, ground, and lapped to ensure leak free sealing.

·Fully guided wedge, precision machined body channels, for accurate, repeatable seating alignment.

·Graphite packing, complete with braided graphite filament yarn anti-extrusion rings, is standard.

·Standard body and bonnet materials are carbon steel (ASME SA105), alloy steel (ASME SA182 Gr. F11) and stainless steel (ASME SA182 Gr. F316) Trim for steel valves is 13% chrome stainless steel. 316 stainless steel valves have 316 trim.

·Code compliance with ASME B16.34 and the ASME boiler and pressure vessel code, Section I.

Nominal Diameter DN(mm)	Main External and Connecting Dimensions								WT(kg)
Nominal Diameter DN(mm)	L	d	S	L₁	T	L₂	H	D₀	WT(kg)
Z41H-16C Z41H-25 Z41H-40 Z11H-16C Z11H-25 Z11H-40 Z61H-16C Z61H-25 Z61H-40
15	90	13	22.5	10	1/2	15	151	118	6.9
20	100	18	28.5	11	3/4	17	182	130	9.8
25	120	23	34.5	12	1	19	197	150	13.5
32	120	28	43	14	1 ¼	21	201	166	19.5
40	135	36	49	15	1 ½	21	227	180	28.5
50	155	45	61	16	2	25	253	180	30.3
Z41H-64 Z11H-64 Z61H-64
15	90	16	22.5	10	1/2	15	151	118	7.7
20	100	18	28.5	11	3/4	17	182	130	11.3
25	120	23	34.5	12	1	19	197	150	16.8
32	130	28	43	14	1 ¼	21	212	180	21.2
40	150	36	49	15	1 ½	21	231	180	32.6
50	155	45	61	16	2	25	253	180	35

Nominal Diameter DN(mm)	Main External and Connecting Dimensions								WT(kg)
Nominal Diameter DN(mm)	L	d	S	L₁	T	L₂	H	D₀	WT(kg)
Z41Y-100 Z11Y-100 Z61Y-100
15	90	13	22.5	10	1/2	15	151	118	7.8
20	100	18	28.5	11	3/4	17	182	130	12.5
25	120	23	34.5	12	1	19	197	150	17.5
32	130	28	43	14	1 ¼	21	212	180	23.5
40	150	36	49	15	1 ½	21	131	180	38.5
50	155	45	61	16	2	25	253	180	42.2
Z41Y-160 Z11Y-160 Z61Y-160
15	90	13	22.5	10	1/2	15	151	118	8.0
20	100	18	28.5	11	3/4	17	182	130	13.6
25	120	23	34.5	12	1	19	197	150	19.4
32	130	28	43	14	1 ¼	21	212	180	25.1
40	150	36	49	15	1 ½	21	231	180	41.6
50	155	45	61	16	2	25	253	180	49.0

AEN.TECH

Request A Quote

nickname：

mailbox：

content：

Recommended products

Forged steel gate valve