Request A Quote

Now ask about our full range of products and services.

  • nickname:

  • mailbox:

  • content:

Sanitary electric ball valve

9 Jul 2018 13:47:00 browse:3032
  • Introduction
  • Technical Parameters

overview of Electric cutting Ball Valve products

Anshan AEN.TECH ZAJO electric cut-off ball valve adopts O type ball core structure, so it is also called electric O type ball valve. The electric cutting ball valve has the advantages of compact structure, small volume, light weight, close distance between the valve seat and the end flange, less material retention, superior sealing performance and so on. The electric switch ball valve is suitable for the two position cut off situation. The connection between the valve and the actuator adopts the direct connection mode, the electric actuator does not need to be equipped with servo amplifier, and the 220 VAC power supply can be input to control the operation. Electric cutting ball valve has the advantages of simple connection, compact structure, small size, light weight, low resistance, stable and reliable operation. Electric O ball valve and electric cut-off ball valve are widely used in chemical, petroleum, pharmaceutical, light industry and other industries.

main technical parameters of electric cutting valve
Nominal size(mm) 15 20 25 32 40 50 65 80 100 125 150 200 250 300
discharge coefficient Kv 21 38 72 112 170 273 384 512 940 1452 2222 3589 5128 7359
Nominal pressure (MPa) PN1.6、2.5、4.0、6.4MPa
Leakage amount Soft seal:no leakage;hard seal:≤rated flow10-5
Body form Two-stage valve body ( floating ball ) Two-stage valve body ( fixed
sphere )
core form “O”- shaped spherical valve core
Seal packing (PTFE)、Metal graphite winding gasket
Type of attachment Flanges, welding, threads
Discharge characteristic Approximate fast opening characteristic
Adjustable extent DN15-65 DN80-300
250:1 350:1
Intrinsic error ±1%
Blind spot ≤1%
Return different ≤1%
Applicable temperature Seal face
PTFE≤150℃ RTFE≤180℃ PPL≤300℃ hard seal≤450℃
Configuration executive Series of angle stroke actuators such as PSQHQQ, UNIC, 361RSJO, etc.
Control mode Switch in position lamp (switch two position control), passive contact signal 1 / 5 K potentiometer, intelligent regulation (4~20mA analog signal control)
Technical parameters of actuators for electric shutoff ball valves
Actuator category Imported YH series actuator parameters Parameters of imported 3410 r series actuators Imported YHQ series actuator parameters
Power supply voltage Standard: 220 v AC single phase optional: 110 v AC single phase, 380 / 440 v AC three phase, 24 v / 110 v / 220 v AC
Output torque 50N·M~2000N·M 50N·M~1500N·M 50N·M~3000N·M
Range of motion 0~90° 0~360° 0~90° 0~90°、0°~270°Optional
Control mode Switch in-place lamp ( switch two-position control ), passive contact signal, 1 / 5k potentiometer, intelligent adjustment ( 4 ~ 20ma analog signal control )
actuation time 15second/30second/60second 10second/15second/30second 18S~112S
protector overtemperature protection Overload protection Built - in overheat protection and overload protection
Ambient temperature -30°~60° -30°~60° -20℃~+70℃
hand operation Operate with attached handle Operate with attached handle Mechanical clutch mechanism with handwheel operation
Mechanical limit Electrical and mechanical double limit Electrical and mechanical double limit 2 external adjusting bolts
the protection grades IP65 IP55 IP65、IP67、CustomizableIP68
Explosion-proof grade No explosion proof ExdⅡ BT4 ExdⅡ BT4,ExdⅡ CT6
Position measurement Optional switch or potentiometer Proportional control unit Potentiometer, proportional control unit
Drive motor 8W/E AC reversible motor Squirrel cage asynchronous motor
Wire inlet interface PE1/2〞incoming line lock 2-PF 1/2〞incoming line lock 2个 PF 3/4”
Shell material Aluminium alloy Steel, aluminum alloy Steel, aluminum alloy, aluminum bronze, polycarbonate
external coating Dry powder, epoxy polyester, with super anti-corrosion function
The unique electric brake circuit is adopted, thus the positioning accuracy is high, the actuating mechanism is sensitive, the starting and stopping are quick, and the operation is stable. At the same time, it has the characteristics of anti - interference, anti-surge voltage and strong anti-breakdown capability.
It is suitable for regulating circuits with frequent movements. when the connection duration is 25 %, the number of movements per hour can reach 630 - 1200.
selection of electric cutting ball valve product
Part name Material name
body WCB 304(CF8) 316(CF8M) 316L(CF3M)
ball 2Cr13+Nitridation treatment 304 316 316L
stem 2Cr13 304 316 316L
Seal ring (PTFE)、(PPL)、para-position aggregation、flexible graphite
Applicable medium water、gas、
steam、the oil
quality and so on
Niter acids and so on
corrosive environment
Vinegar acids and so on
corrosive environment
urea and so on corrosive
selection of electric cutting ball valve product
Test criteria Nominal pressure(Mpa) pressure(class) JIS(Mpa)
Test pressure
1.6 2.5 4.0 6.4 10.0 150 300 600 10K 20K
Strenght test 2.4 3.8 6.0 9.6 15.0 3.1 7.8 15.3 2.4 3.8
Seal test 1.8 2.8 4.4 7.0 11.0 2.2 5.6 11.2 1.5 2.8
Air tight test 0.5~0.7

selection of electric cutting ball valve product

(1) Valve body parameters: nominal diameter, working pressure, process medium, application situation, valve body material, etc.

(2) Actuator parameters: power supply voltage, control mode, control signal (4-20mA1-5V), mode of action (electric-open), The above technical parameters are provided in detail so as to facilitate our company's sales and technical personnel for your accurate selection. If there is any doubt. You can call us, and we will do our best to provide you with excellent service