AEN.TECH

Request A Quote

Now ask about our full range of products and services.

  • nickname:

  • mailbox:

  • content:

PneumaticThree-way ball valve

23 May 2018 09:45:00 source:aen-valve.com browse:2813
  • Introduction
  • Technical Parameters

Pneumatic three-way ball valve

A three-channel rotary ball valve, which is used for medium diversion, confluence and flow direction switching. any pipe can be used as an inlet or an outlet. Pneumatic three-way ball valves are divided into pneumatic three-way l - type ball valves and pneumatic three-way t - type ball valves, which can meet different operating process requirements. The pneumatic three-way l - shaped ball valve cuts off two of the three pipelines, and the pneumatic three-way t - shaped ball valve realizes the merging and shunting of the three communicating pipelines. The pneumatic three-way ball valve is matched with the electric valve positioner, and the operation can be controlled by inputting 4 - 20m ADC signals and 0.4 - 0.7 MPa air source, so as to realize the adjustment of parameters such as pressure, flow rate, temperature and liquid level. It is also equipped with travel limit switch, solenoid valve, pressure reducing valve and 0.4 - 0.7 MPa air source to realize switch operation and send out two pairs of passive contact signals to indicate the switch of the valve. Pneumatic three-way ball valves are widely used in chemical, petroleum, textile, electric power, food and pharmacy, refrigeration, aviation, aerospace, paper and other industrial fields.

Product features of pneumatic three-way ball valve

(1) the fluid resistance is small, and its resistance coefficient is equal to that of the pipe section of the same length.

(2) simple structure, small volume and light weight.

(3) it is tight and reliable. at present, the sealing surface materials of ball valves are widely used in plastics and have good sealing performance. it has also been widely used in vacuum systems.

(4) convenient operation, quick opening and closing, only 90 degrees rotation from full opening to full closing, and convenient remote control.

(5) it is convenient to maintain, the ball valve is simple in structure, the sealing ring is usually movable, and it is convenient to disassemble and replace.

(6) when fully opened or closed, the sealing surface of the ball and valve seat is isolated from the medium, and when the medium passes through, it will not cause erosion of the sealing surface of the pneumatic three-way ball valve.

(7) the scope of application is wide, ranging from small to several millimeters and from large to several meters, and can be applied from high vacuum to high pressure.

Main technical parameters of pneumatic three-way ball valve
Nominal size DN(mm) 15 20 25 32 40 50 65 80 100 125 150 200
Allowable pressure different (MPa) ≤Nominal pressure
Range of motion 0~90°;0~180°
Body form Twp-section split cast valve body
Bonnet form Integral type
Gland type Bolt compression type
Seal packing V - shaped PTFE filler, PTFE impregnated asbestos filler, asbestos textile filler, graphite filler
Connection mode Flange type, thread type ( applicable to 1 / 2 " ~ 2" )
Core form Three-way ball valve core
Discharge characteristic Approximate fast opening characteristic
Leakage Q Soft seal: zero leakage; Metal seal: according to GB / t 4213 - 92, less than 0.01 % of rated kv
Configuration actuator model Gt, Sr, ST, at, aw series single and double acting pneumatic actuators
Control mode Switch two-position control, 4 - 20ma analog control
Technical parameters of pneumatic three-way ball valve actuator
Actuator model Gt, Sr, ST, at, aw series single and double acting pneumatic actuators
Sypply pressure 0.4~0.7MPa
Air source interface G1/4"、G1/8"、G3/8"、G1/2"
Ambient temperature -30~+70℃
Action form Single acting actuator: air shutoff type ( b ) - valve position open ( FO ) when air is lost; Air opening( k ) - valve position closing (FC ) in case of air loss。Double - acting actuator: air shutoff type ( b ) - valve position maintenance ( FL ) in case of air loss; Air opening ( k ) - valve position maintenance ( FL ) in case of air loss
Accessory Positioner, solenoid valve, air filter pressure reducer, retaining valve, travel switch, valve position transmitter, handwheel mechanism, etc.
Material of main parts of pneumatic three-way ball valve
Part name materials
Body WCB 304(CF8) 316(CF8M) 316L(CF3M)
ball 2Cr13+Nitridation treatment 304 316 316L
steam 2Cr13 304 316 316L
Seat seal ring PTFE、PPL、seal(hard alloy)
packing V- PTFE PTFE filler, flexible graphite

Control mode of pneumatic three-way ball valve

Pneumatic three-way ball valves are divided into l - type and t - type, and the flow direction of medium is shown in the following figure. The pneumatic three-way l - shaped ball valve is suitable for switching the flow direction of the medium and can make two mutually perpendicular passages communicate. the pneumatic three-way t - shaped ball valve is suitable for shunting, merging or switching the flow direction of the medium. the t - shaped hole can make the three passages communicate with each other or two of them. the pneumatic three-way ball valve generally adopts a three-seat structure and can also adopt a four-seat structure according to the requirements of users.

Product selection of pneumatic three-way ball valve

( 1 ) valve body parameters: nominal diameter, working pressure, process medium, use occasion, valve body material and other series of parameters.

( 2 ) actuator parameters: actuator form, control mode, control signal ( 4 - 20ma, 1 - 5v ), action mode ( air - open, air - closed )

Provide the above technical parameters in detail as far as possible, so as to facilitate our company's operation and technical personnel to accurately select the type for you. If you have any questions, you can call us and we will do our best to provide you with quality service!

Next:pneumatic v - ball valve