Now ask about our full range of products and services.
Pneumatic low temperature control valve product description
The ZJHP/M-DW pneumatic cryogenic control valve of Anshan AEN.TECH is one of the pneumatic control valves developed by our company for ultra-low temperature conditions. Pneumatic cryogenic control valves are widely used in the automatic control of petroleum, chemical, metallurgical and other industrial operating processes. Pneumatic low temperature control valve It is especially suitable for the adjustment of medium (such as liquid oxygen, liquid nitrogen, etc.) in the low temperature state of -60~-196°C. To ensure adjustment accuracy, a valve positioner must be used. Ultra-low temperature pneumatic control valve is a single seat control valve, two-seat control valve deformation products. It differs from the normal temperature control valve in that it adopts a long-neck type upper valve cover to make the packing work at room temperature. Pneumatic low temperature control valve is given by the valve positioner signal pressure input to the air chamber of the pneumatic membrane actuator, generates thrust, drive the valve core through the connecting rod, the position of the valve changes the flow cross-sectional area of the valve to achieve the media flow Adjustment.
Nominal diameter(DN) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
Valve seat diameter(dn) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
Rated flow coefficient(KV) |
single seat | 6.9 | 11 | 17.6 | 27.5 | 44 | 69 | 110 | 176 | 275 | 440 | 630 | 875 | 1250 |
sleeve | 6.3 | 10 | 16 | 25 | 40 | 63 | 100 | 155 | 250 | 370 | 580 | 900 | 1300 | |
Allowable pressure difference(MPa) |
single seat | 3.8 | 3.2 | 3.0 | 2.0 | 1.8 | 1.5 | 1.4 | 1.0 | 0.7 | 0.6 | 0.5 | 0.3 | 0.1 |
sleeve | 6.4 | 6.4 | 5.2 | 5.2 | 4.6 | 4.6 | 3.7 | 3.7 | 3.5 | 3.1 | 3.1 | 2.6 | 2.2 | |
Nominal pressure(MPa) | 1.6、2.5、4.0、6.4 | |||||||||||||
Rated route(mm) | 16 | 25 | 40 | 60 | 100 | |||||||||
Actuator model | ZHA/B-22 | ZHA/B-23 | ZHA/B-34 | ZHA/B-45 | ZHA/B-56 | |||||||||
Valve cover form | Low temperature type-10~-196℃、Low temperature type-196~-250℃ | |||||||||||||
Capping form | Bolt compression type | |||||||||||||
Seal packing | V type PTFE packing、V type flexible graphite filler | |||||||||||||
Valve body material | stainless steel(CF8、CF8M、CF3、CF3M) |
Valve core form | single seat Plunger type valve core 、sleeve Guided valve core |
Flow characteristics | Linear, equal percentage |
valve core material | stainless steel (304、316、316L) |
Configure Actuator Category |
ZHA/B Multi-spring film actuator | ||||
Actuator model | ZHA/B-22 | ZHA/B-23 | ZHA/B-34 | ZHA/B-45 | ZHA/B-56 |
Effective area(cm2) | 350 | 350 | 560 | 900 | 1400 |
route (mm) | 10、16 | 24 | 40 | 40、60 | 100 |
Spring range(KPa) | 20~100(standard)、20-60、60-100、40-200、80-240 | ||||
Diaphragm material | Nitrile rubber clip nylon cloth, ethylene propylene rubber clip nylon cloth | ||||
Air supply pressure | 140~400KPa | ||||
Air interface | RC1/4" | ||||
Ambient temperature | -30~+70℃ | ||||
equipped with accessories |
Locator, air filter pressure reducer, position valve, route switch, valve positioner, handwheel mechanism, etc. | ||||
Form of action | Air-to-close (B)—Valve open (FO) when deaeration; Air-opening (K)—Valve off (FC) when deaeration |
Item | Without positioner | With positioner | ||
Basic error % | ±5.0 | ±1.0 | ||
Backlash % | ≤3.0 | ≤1.0 | ||
dead zone % | ≤3.0 | ≤0.4 | ||
Starting to end point deviation % |
Air open | Starting point | ±2.5 | ±1.0 |
Starting point | ±5.0 | ±1.0 | ||
Air shut | Starting point | ±5.0 | ±1.0 | |
end point | ±2.5 | ±1.0 | ||
Rated route deviation % | ≤2.5 | |||
Leakage L/h | 0.01%× Valve rated capacity | |||
Adjustable range R | 50:1 |