AEN.TECH
Now ask about our full range of products and services.
Product overview of internally threaded electric ball valve
Anshan AEN.TECH internal thread electric ball valve is suitable for all kinds of pipes with PN1.0 and 10.0MPa operating temperature -29180 ℃ (sealing ring is reinforced polytetrafluoroethylene) or -29C300 ℃ (sealing ring is para-position polystyrene). The electric ball valve with internal thread is used for two-position cutting, An occasion of adjustment. Used to truncate or connect a medium in a pipe. Electric actuator built-in servo system, no additional servo amplifier, input 4-20mA signal 220 VAC power supply can be operated. Electric inner thread ball valve has the advantages of simple connection, compact structure, small size, light weight, low resistance, stable and reliable operation. Internal thread electric ball valve can be divided into: three-piece electric ball valve, welding electric ball valve, clamp type electric ball valve. Suitable for water, steam, oil, nitric acid, acetic acid, etc.
| Nominal size DN(mm) |
10 | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 |
| Nominal pressure ( MPa ) |
PN1.6、2.5、4.0、6.4 MPa | |||||||||
| body form | Three pieces of precision cast valve body and two pieces of precision cast valve body | |||||||||
| Connection form |
Thread type, welding type, clamp type | |||||||||
| core form | " o" type spherical valve core | |||||||||
| Seal packing | Approximate quick opening type | |||||||||
| discharge characteristic |
0～90° | |||||||||
| Range of motion |
According to GB / t 4213 - 92, less than 0.01 % of rated kv ( soft seal: zero leakage ) | |||||||||
| Leakage Q | ±1% | |||||||||
| Temperature tolerance requirement |
±1% | |||||||||
| intrinsic error | ≤1%(adjustable) | |||||||||
| return difference |
250：1 | |||||||||
| dead zone | It can be equipped with yh, yhhq, 381 r, psq and other series of angular travel electric actuators | |||||||||
| adjustable extent |
Switch in-place lamp ( switch two-position control ), intelligent adjustment ( 4 ~ 20ma analog signal control ) | |||||||||
| Actuator category |
Imported YH series actuator parameters |
Parameters of imported 3410 r series actuators |
Imported YHQ series actuator parameters |
| Power supply voltage |
Standard: 220 v AC single phase optional: 110 v AC single phase, 380 / 440 v AC three phase, 24 v / 110 v / 220 v AC | ||
| Output torque |
50N·M～2000N·M | 50N·M～1500N·M | 50N·M～3000N·M |
| Range of motion |
0～90° 0～360° | 0～90° | 0～90°、0°～270° Optional |
| Control mode |
Switch in-place lamp ( switch two-position control ), passive contact signal, 1 / 5k potentiometer, intelligent adjustment ( 4 ~ 20ma analog signal control ) | ||
| actuation time |
15second/30second/60second | 10second/15second/30second | 18S～112S |
| protector | overtemperature protection | Overload protection | Built - in overheat protection and overload protection |
| Ambient temperature |
-30°～60° | -30°～60° | -20℃～+70℃ |
| hand operation |
Operate with attached handle | Operate with attached handle | Mechanical clutch mechanism with handwheel operation |
| Mechanical limit |
Electrical and mechanical double limit | Electrical and mechanical double limit | 2 external adjusting bolts |
| the protection grades |
IP65 | IP55 | IP65、IP67、IP68 |
| Explosion- proof grade |
No explosion proof | ExdⅡ BT4 | ExdⅡ BT4,ExdⅡ CT6 |
| Position measurement |
Optional switch or potentiometer | Proportional control unit | Potentiometer, proportional control unit |
| Drive motor | 8W/E | Ac reversible motor | Squirrel cage asynchronous motor |
| Wire inlet interface |
PE1/2〞Wire feed lock | 2-PF 1/2〞Wire feed lock | 2-PF 3/4” |
| Shell material | Aluminium alloy | Steel, aluminum alloy | Steel, aluminum alloy, aluminum bronze, polycarbonate |
| external coating |
Dry powder, epoxy polyester, with super anti-corrosion function | ||
| The unique electric brake circuit is adopted, thus the positioning accuracy is high, the actuating mechanism is sensitive, the starting and stopping are quick, and the operation is stable. At the same time, it has the characteristics of anti - interference, anti-surge voltage and strong anti-breakdown capability. | |||
| It is suitable for regulating circuits with frequent movements. when the connection duration is 25 %, the number of movements per hour can reach 630 - 1200. | |||
| Connection mode | Internal thread connection | Butt welding connection | |||||
| Part name |
Valve cover | WCB | CF8(304) | CF8M(316) | WCB | CF8(304) | CF8M(316) |
| Ball, valve stem |
2Cr13 | 0Cr19Ni9 | OCr17Ni12Mo2 | 2Cr13 | 0Cr19Ni9 | OCr17Ni12Mo2 | |
| Sealing ring, packing |
Reinforce PTFE, para-polystyrene | ||||||
| Applicable working condition |
Applicable medium | Water, steam Oil, etc. |
Nitric acid, etc Corrosive medium |
Acetic acid, etc Etching medium |
Water, steam Oil, etc. |
Nitric acid, etc Corrosive medium |
Acetic acid, etc Etching medium |
| Applicable temperature | -29～180°C(Reinforce PTFE)、-29～300°C( para-polystyrene) | ||||||
Internal thread electric ball valve product selection
(1) valve body parameters: nominal diameter, working pressure, process medium, use occasions, valve body materials and other series of parameters.
(2) actuator parameters: power supply voltage, control mode, Control signal (4-20mAX 1-5V), the mode of action (electric-open, electric-switch) to provide the above technical parameters as detailed as possible to facilitate our company sales and technical personnel for your accurate selection. If there is any doubt. You can call us, and we will do our best to provide you with excellent service
